Board-level repair trainer. Diagnose and repair simulated circuit boards on a realistic bench, right in the browser.
▶ Try it in your browser · Watch the 1-minute showcase (MP4)
DEADBOARD puts a broken board on your bench and gives you the tools a repair technician uses. You probe, reason, rework and prove the fix. The circuit runs on a SPICE-style simulator, so the meter reads what the circuit really does, not a scripted answer.
- Real instruments. Multimeter (V, Ω, diode, capacitance, current in series), bench supply
- Real rework. Soldering iron, hot air, desoldering wick, trace cutter, jumper wire, fitting
- Real boards. Besides hand-made training boards it imports KiCad designs. Two
- Repair challenges. Each scenario has test-bench objectives. Pass them all, with the circuit
- Walkthrough videos. Every premade scene has a "how to approach" video and a separate,
- Honest numbers. Where a value is estimated or a waveform is synthesized, the app says so.
Run it
You need Node.js 20+ and a recent browser. The bench draws with WebGPU where the browser offers
it and falls back to WebGL2 otherwise (blocklisted GPUs, older Safari, Firefox without WebGPU);
add ?renderer=webgl2 or ?renderer=webgpu to the app URL to force one.
npm install
npm run dev # http://localhost:5173
npm test # simulator, import, physics and scenario tests
npm run build # static site in dist/
Scenarios
| | | |---|---| | Beginner | First Light, Cold Joint 101, Solder Bridge 101, One-Way LED, Resistor & Ohm's Law, Voltage Divider 101 | | Training boards | Bridge Troll, Backwards Day, Ghost Short, Smoke Test, The Sagging Rail | | Open-hardware demos | MNT Reform 2 · dead 3.3 V rail; Antmicro baseboard · no 3.3 V, flaky 5 V |
Import your own board: KiCad .kicad_pcb, a boardview (OpenBoardView/TopTest or BRD2 .brd,
Tebo-ICT .tvw), or a shared .pcbfix.json challenge.
Languages: English and Russian (picked from the browser, or with the language menu). To add one, see docs/TRANSLATING.md.
Feedback
Found a bug or have an idea? Press the speech-bubble button in the bench (or Feedback on the homepage). No account needed: the message is emailed to the maintainer, with optional technical details (browser, GPU, board, view) so the problem can be reproduced. With a GitHub account you can also open an issue.
The form delivers through FormSubmit. The destination is a build setting,
VITE_FEEDBACK_TO (an address, or the alias FormSubmit sends after its one-time activation): put it
in .env.local for local builds, and in the repository variable FEEDBACK_TO for GitHub Pages.
Without it, the form falls back to a prefilled GitHub issue.
Docs
- docs/DEMOS.md: how the demo boards are built from upstream KiCad sources
- docs/VIDEOS.md: how the walkthrough videos are recorded
- docs/BRAND.md: name, logo, colour, type and voice
- docs/SIMULATION_HANDOFF.md: simulator architecture, models and open items
Licence
DEADBOARD is licensed under the Apache License 2.0. The demo boards in
public/demos/ keep the licences of their source designs (CERN-OHL-S-2.0 and Apache-2.0); see
NOTICE and public/demos/NOTICE.txt. MNT Reform is a
trademark of MNT Research GmbH and Jetson a trademark of NVIDIA; no endorsement is implied.