Profile
Back to NewsBack
GitHub Trending 4 min
Reader Mode
ovh/terraform-provider-ovh: 🚀 Terraform Provider for OVHcloud ☁️  - Manage your cloud infrastructure, domains, and services as code. Provision and configure OVHcloud resources with the power of Infrastructure as Code (IaC). Automate your entire OVHc

ovh/terraform-provider-ovh: 🚀 Terraform Provider for OVHcloud ☁️ - Manage your cloud infrastructure, domains, and services as code. Provision and configure OVHcloud resources with the power of Infrastructure as Code (IaC). Automate your entire OVHc

6 hours ago

Terraform OVH Provider ==================

The OVH Provider allows Terraform to manage OVH resources.

License</a> GitHub release (latest by date)</a> Release Date</a> !Terraform Provider Downloads !Website

Requirements ------------

Building The Provider ---------------------

Clone the repository anywhere on your machine, then build the provider:

$ git clone [email protected]:ovh/terraform-provider-ovh
$ cd terraform-provider-ovh
$ make build

make build runs go install, which puts the terraform-provider-ovh binary in $(go env GOPATH)/bin (or in $GOBIN if it is set).

Using the provider ----------------------

Please see the documentation in the Terraform registry.

Or you can browse the documentation within this repo here.

Using the locally built provider ----------------------

Configure a dev override in your .terraformrc to be able to test the local version of the provider you built. If not already present, create a terraformrc file and add a dev override for the ovh provider.

$ cat > ~/.terraformrc <<EOF
provider_installation {
  dev_overrides {
    "ovh/ovh" = "$(go env GOPATH)/bin/"
  }

direct {} } EOF

Build the provider.

$ make build

Create a Terraform configuration with the following provider configuration.

$ mkdir ~/test-terraform-provider-ovh
$ cd ~/test-terraform-provider-ovh
$ cat > providers.tf <<EOF

Configure the OVHcloud Provider

terraform { required_providers { ovh = { source = "ovh/ovh" version = ">= 2.7.0" } } }

provider "ovh" { } EOF

Export OVHcloud API credentials

$ export OVH_ENDPOINT="..." $ export OVH_APPLICATION_KEY="..." $ export OVH_APPLICATION_SECRET="..." $ export OVH_CONSUMER_KEY="..."

Initialize your project and remove existing dependencies lock file

$ rm -f .terraform.lock.hcl && terraform init ...

Apply your resources & datasources

$ terraform apply ...

Developing the Provider ---------------------------

If you wish to work on the provider, you'll first need Go installed on your machine (version 1.27+ is required).

To compile the provider, run make build. This will build the provider and put the provider binary in the $(go env GOPATH)/bin directory.

$ make build
...
$ $(go env GOPATH)/bin/terraform-provider-ovh
...

Testing the Provider --------------------

In order to test the provider, you can simply run make test.

$ make test

In order to run the full suite of Acceptance tests you will need to have the following list of OVH products attached to your account:

You will also need to setup your OVHcloud API credentials (see documentation).

Once setup, please follow these steps to prepare an environment for running the Acceptance tests:

$ cat > ~/.ovhrc <<EOF

setup ovh api credentials

export OVH_ENDPOINT="ovh-eu" export OVH_APPLICATION_KEY="..." export OVH_APPLICATION_SECRET="..." export OVH_CONSUMER_KEY="..." EOF $ source ~/.ovhrc

The acceptance tests read their test services and values from environment variables. The most common ones are listed below, and the Testing and Development section of the provider documentation describes more of them:

export OVH_IP_TEST="..."
export OVH_IP_BLOCK_TEST="..."
export OVH_IP_REVERSE_TEST="..."
export OVH_IP_MOVE_SERVICE_NAME_TEST="..."
export OVH_IPLB_SERVICE_TEST="..."
export OVH_CLOUD_PROJECT_SERVICE_TEST="..."
export OVH_CLOUD_PROJECT_REGION_TEST="..."
export OVH_CLOUD_PROJECT_LOADBALANCER_TEST="..."
export OVH_CLOUD_PROJECT_FAILOVER_IP_TEST="..."
export OVH_CLOUD_PROJECT_FAILOVER_IP_ROUTED_TO_1_TEST="..."
export OVH_CLOUD_PROJECT_FAILOVER_IP_ROUTED_TO_2_TEST="..."
export OVH_VRACK_SERVICE_TEST="..."
export OVH_VRACK_PUBLIC_ROUTING_PRIORITY_REGION_TEST="..."
export OVH_VRACK_PUBLIC_ROUTING_PRIORITY_ID_TEST="..."
export OVH_VRACK_PUBLIC_ROUTING_PRIORITY_AZ_A_TEST="..."
export OVH_VRACK_PUBLIC_ROUTING_PRIORITY_AZ_B_TEST="..."
export OVH_VRACK_PUBLIC_ROUTING_PRIORITY_AZ_C_TEST="..."
export OVH_VRACKSERVICES_SERVICE_TEST="..."
export OVH_ZONE_TEST="..."
export OVH_DOMAIN_NS1_HOST_TEST="..."
export OVH_DOMAIN_NS1_IP_TEST="..."
export OVH_DOMAIN_NS2_HOST_TEST="..."
export OVH_DOMAIN_NS3_HOST_TEST="..."
export OVH_DOMAIN_DS_RECORD_ALGORITHM_TEST="..."
export OVH_DOMAIN_DS_RECORD_PUBLIC_KEY_TEST="..."
export OVH_DOMAIN_DS_RECORD_TAG_TEST="..."
export OVH_OKMS="..."
export OVH_STORAGE_EFS_SERVICE_TEST="..."
export OVH_DBAAS_LOGS_SERVICE_TEST="..."

$ make testacc

To run only one acceptance test, you can run:

$ make testacc TESTARGS="-run TestAccCloudProjectKubeUpdateVersion_basic"

To run one acceptance test and bypass go test caching:

$ TF_ACC=1 go test -count=1 $(go list ./... |grep -v 'vendor') -v -run  TestAccCloudProjectKubeUpdateVersion_basic -timeout 600m -p 10

To remove dangling resources, you can run:

$ make testacc TESTARGS="-sweep"

Contributing

Please read the contributing guide to learn about how you can contribute to the OVHcloud Terraform provider ;-).
There is no small contribution, don't hesitate!

Our awesome contributors:

Chat with me