Profile
Back to NewsBack
GitHub Trending 32 min
Reader Mode
HuskerMinion/techo5: Open firmware for the Echo Show 5, 1st and 2nd gen: Alpine Linux instead of Android, no Alexa. A local Home Assistant voice satellite with its own touch screen, on-device wake word, SSH and A/B over-the-air updates.

HuskerMinion/techo5: Open firmware for the Echo Show 5, 1st and 2nd gen: Alpine Linux instead of Android, no Alexa. A local Home Assistant voice satellite with its own touch screen, on-device wake word, SSH and A/B over-the-air updates.

TECHO5

Your Echo Show, rebuilt. Linux inside, Home Assistant in charge, no Amazon cloud.

Latest release Alpine Linux No Android No Alexa Home Assistant MIT license Buy Me a Coffee

What's new · Built on EchoLocal · Why · Screenshots · Stock vs TECHO5 · Install · Under the hood · Credits · TECHO5 ATHENA · TECHO5 Dot · TECHO5 Spot


New: the Echo Show 8 2nd gen (2021, athena) runs TECHO5 on a 64-bit mainline Linux kernel.
The story, the board and the UART pads: TECHO5 ATHENA.
Install: docs/install-athena.md.

TECHO5 (Tech Echo 5) is open firmware for Amazon's Echo Show 5 and Echo Show 8, both generations of each. It replaces Fire OS and Alexa with a small Alpine Linux image and one Go daemon, turning the Show into a fast, private Home Assistant voice satellite with a touch screen of its own. It started on the Show 5, which is where the name comes from.

Every Echo that can be unlocked now runs it. The bootloader exploit these devices are opened with, amonet, opens most of these Echos, and saiyaku-athena unlocks the Show 8 2nd gen. All of them run the same daemon:

| Device | Model | Repository | Status | |---|---|---|---| | Echo Show 5, 2nd gen (2021, cronos) | C76N8S | this one | In daily use | | Echo Show 5, 1st gen (2019, checkers) | H23K37 | this one, same binary; hardware notes in techo5-checkers | In daily use | | Echo Show 8, 1st gen (2019, crown) | C7H6N3 | this one, same binary | In daily use | | Echo Show 8, 2nd gen (2021, athena) | A8H3N2 | this one, same daemon on its own 64-bit mainline kernel; the story in TECHO5 ATHENA | In daily use on two units | | Echo Spot, 1st gen (2017, rook) | VN94DQ | TECHO5 Spot | In daily use | | Echo Dot, 2nd gen (2016, biscuit) | RS03QR | TECHO5 Dot | In daily use | | Echo, 2nd gen (2017, radar) | XC56PY | TECHO5 Dot, same release and daemon | Working on one unit | | Echo Dot, 3rd gen (2018, donut) | D9N29T | TECHO5 Dot, same release, its own daemon build | Working on two units | | Echo Input (2018, cupcake) | C1125P | TECHO5 Dot, the Echo Dot 3rd gen's release and daemon build | Working on one unit | | Android tablets and the Meta Portal, no unlock | Android 8.0 or later, ARM | TECHO5 Panel, an app with the same daemon inside (docs/panel.md) | Tested on a Fire HD 8 (10th gen), a Galaxy Tab S6 Lite and a Meta Portal (2nd gen); other tablets may work |

Every other device amonet opens is a Fire tablet. No Echo made after 2021 has a public unlock.

Beyond the Echos and the Panel's tablets, the Skylight Calendar 15 (150-CAL) runs it too, a wall calendar with a 1920x1080 touch screen. TECHO5 puts its own 64-bit mainline kernel and the same daemon on it, over adb, after a full backup. It has no microphone, so it's a screen and a speaker: no wake word, voice, phone calls or intercom. Tried on one unit, the newest port: docs/install-skylight.md.

How it compares with EchoLocal, EchoMuse, echo-dot-assist, Kiosk Satellite and View Assist: docs/comparison.md.

The screen turning into a sunrise over the twenty minutes before an alarm: a dark red sky warming through orange to a pale gold, a sun climbing into it, the time readable throughout

Waking to light. For up to half an hour before an alarm the screen becomes a dawn, on a curve that does most of its work near the end. Every frame here is drawn by the code the device draws with.

What's new

The bigger changes of September to November 2026. Every release lists the rest.

  • 📞 Call by wake word, Hang up bar, repeating alarms (v1.6.28). A wake word can call a phone book
contact (#463), calls can keep the page on screen with a Hang up bar (#459), and the Set an alarm blueprint understands repeating days (#461).
  • 🎙️ External microphone processing and custom screens (v1.6.27). An interface for a separately
installed audio processing helper, off unless you choose External (#407, docs/external-asp.md). Other boards can add their own full-screen pages and show one when idle (#447). AirPlay 2 works on the Show 8 2nd gen (techo5-athena #5).
  • 🎶 Snapcast, your own Headscale and a dark nursery (v1.6.26). Every device can be a
Snapcast client, in step with the house's other Snapcast speakers (#406). Tailscale can join a Headscale server you run instead of Tailscale's, from the setup page or the headscale_login action (docs/tailscale.md). **Baby monitor light** turns the listening mark down to its dimmest or off, for a nursery kept dark (#448).
  • 📝 To-do lists, a baby monitor and your own sounds (v1.6.23). With echo cancellation on, you can
speak right after the wake word, without waiting for the sound. A To-do tab in the drawer shows Home Assistant's to-do and shopping lists on the Show, the Skylight and the Panel. A private link plays the room's sound live in a phone's browser (Baby monitor, off until you turn it on), and the wake, volume, button, Bluetooth and Drop In sounds can be your own. Voice volume and Call volume sit beside the music volume, and the assistant's replies can play on another speaker. Pop-ups can be large or huge for reading across a room (#396), the night clock can keep Next up (#397), and a fan on a drawn dashboard opens speed, direction and presets on a long press (#410). The Echo Dot and Echo 2nd gen get a ring that follows the music, and all of them a Clearer speech switch. Bluetooth devices such as Hue bulbs can be paired through the proxy (#398), the Show 8 2nd gen uses the ondemand CPU governor (#413), and the installers try a failed download again (#393).
  • 🌧️ Rain on the glass, and a news update by voice (v1.6.22). Rain on the weather page and
the weather art gathers on the glass and runs down, and lightning strikes at random with a new bolt each time. The direct assistant plays a news update when asked. Wi-Fi quiet hours keeps the device off the Wi-Fi at night (#391), and a repeating alarm can skip one morning from its wake-up light (#360).
  • 📊 Wake scores, a privacy switch and new diagnostics (v1.6.21). Voice request events carry
the wake word's score and why a request was canceled (#381), and Send voice text keeps what you say out of Home Assistant (#383). New sensors show CPU usage, wake word load and the last boot reason (#386). The Show 8 2nd gen gets an opt-in boot layer that falls back to the other slot by itself (#340).
  • ⏸️ A longer pause before the device stops listening (v1.6.20). End of speech pause sets how long
a pause ends what you say, from 0.6 to 2 seconds, for anyone who stops to think mid-sentence (#374). Clearing Music Assistant's queue now clears Now Playing at once (#150), and a Tessera "go to page" tile opens its page (#376).
  • 👏 A stricter clap, and "Alexa, stop" over a ring (v1.6.19). Clap sensitivity adds a Strict
choice for a room where a desk passes for a double clap, and the clap event carries what it measured (#373). A wake word nearly heard over a ringing timer pauses the ring for the second try (#372), and smaller Calendar chips fit a long list of calendars (#371).
  • 🌍 Galician, and a Monday week (v1.6.18). Screen language gains Galician, with its own voice
words and dates (#368), and Dutch for the labels and buttons (#365). A Week starts Monday calendar switch, off by default (#369), and a wake word threshold of its own for while the speaker plays (#367).
  • 🔠 Text size and a dashboard layout (v1.6.17). A Text size setting draws every word on the
screen from 70% to 125% (#363), and Brightness steps down to 5% for a dark room (#362). Drawn dashboards wrap long tile names (#357), show a dimmer's level as a bar (#358), offer a Name below tile layout, and drop the room from a name under its room's heading. AirPlay 2 over IPv6 now really plays (#343), and a third Show 8 2nd gen screen is tested (#361).
  • 🎙️ Record takes of a word (v1.6.16). The setup page can record takes of a wake word on the device's
own microphones, after a press at the device, and hand them over as a zip for training (#315). AirPlay 2 plays from a Mac or iPhone that connects over IPv6 (#343), Now Playing goes once Music Assistant's queue is emptied (#150), and more of the screen follows Screen language, with a translation status page.
  • 🌍 French and Turkish on the screen (v1.6.15). Screen language gains French
(#346) and Turkish (#349). Every alarm can be turned off at once for a trip, and Home Assistant gets a Next scheduled alarm sensor (#350). A wake word sent from the setup page scores on the features it was trained on (#352).
  • 📖 Long answers page along with the voice (v1.6.14). An Assist answer too long for the screen
is shown a page at a time, turning as the voice reads it, on the Show and the Spot (#333). The glance chips under the clock can keep one size (#332), and a second AirPlay sender can take over from the first (#334).
  • 🌍 German, Spanish and Italian on the screen (v1.6.13). Screen language gains German
(#322), Spanish (#327) and a first Italian draft (#310), and the PIN pad and alarm editor follow the language too. The 2nd gen Show 8's camera pages and stream use its hardware JPEG encoder (#320, #321), and calls can switch to WebRTC's echo canceller for their length (#331).
  • 📡 The Panel is a Bluetooth proxy, and AirPlay can set the volume (v1.6.12). On TECHO5 Panel,
Android's Bluetooth now feeds Home Assistant's Bluetooth proxy, with one active connection lent through it (#278); the Panel app also bridges the front camera and, on the JBL Link View, the raw microphone. On the Echos, AirPlay sets the volume makes an iPhone's or Mac's AirPlay slider the device's own volume (#312), and Home Assistant can turn an alarm off and back on without deleting it (alarm_turn_off / alarm_turn_on, #317).
  • 🖥️ The 2nd gen Show 8 draws its screen on its GPU (v1.6.11). The Show 8 2nd gen's
Mali GPU now draws the panel, which leaves the cores free, and an Adaptive backlight switch turns the backlight down on dark screens and draws the pixels brighter by as much, so the screen looks the same for less light (#308). Its camera no longer hangs on a picture too big for the encoder's buffer (#309). Also in v1.6.11: the Bluetooth Secure Connections switch now really reaches the controller (#183), and the installers say when a unit restarts partway, what was erased and how to finish by hand.
  • 🎚️ Wake word scores, and wakesmith for words of your own (v1.6.10). The setup page shows
each wake word's score as it comes, so you can see how close a word gets in your room and pick a threshold that fits (#314). To train a word of your own, wakesmith does it on your own computer from synthetic speech plus real voices: takes you record in the browser and the clips your devices kept. Training a wake word
  • 🎵 Now Playing follows several players (v1.6.10). Pick more than one media player, and the
screen shows whichever is playing. Also in v1.6.10: the 2nd gen Show 8's JD9365 backlight comes back from off (#253), reminders speak on a Home Assistant that isn't in English (#294), and Bluetooth proxy connections need an API encryption key.
  • 🇯🇵 Japanese, Louder speech and Dim after idle (v1.6.9). The screen in Japanese
(#270), AirPlay 2 groups that play in step (#311), a Louder speech switch for replies and announcements, Dim after idle, and four new skins.
  • 🎵 AirPlay 2 on every device (v1.6.8). With the AirPlay switch on, an iPhone can group the
device with other AirPlay 2 speakers, like a HomePod or a Sonos. The AirPlay 2 switch keeps it to classic AirPlay if a group doesn't play in step. Its firewall ports are open only while the AirPlay 2 receiver runs.
  • 🛰️ NetBird (v1.6.8). The other way, beside Tailscale, to keep a device in another house in
your Home Assistant. No longer built in: it runs as tioan's add-on, techo5-netbird. docs/netbird.md
  • 📶 Also in v1.6.8. Home Assistant can connect to Bluetooth devices through a Show, up to three
at a time, with the new Bluetooth proxy connections switch (#184). Weekend nights can have their own hours (#305), and the Skylight's night clock now dims well below its old floor.
  • 🌐 Reach a device from away (v1.6.7). An Echo Show, Echo Spot or Skylight can join your
Tailscale network, so a device in another house stays in your own Home Assistant, and its setup page can be opened from afar with Remote setup. Off until you give it a key; over the tailnet only Home Assistant's encrypted connection, the setup page while Remote setup is on, and SSH when it's on get in. docs/tailscale.md
  • 🆕 The Skylight Calendar 15 (v1.3.0). Not an Echo: the 15-inch wall calendar (150-CAL) runs
TECHO5 on its own 64-bit mainline Linux kernel. Touch, the calendar, photos, dashboards, music and the radio, Bluetooth, the light sensor and the clock work. It has no microphone, so there's no wake word or voice, and no phone calls or intercom. One command installs it over adb from its stock firmware, after a full backup of the unit; it has been tried on one unit. Install: docs/install-skylight.md
  • 📱 TECHO5 on a tablet, no unlock (v1.3.0). TECHO5 Panel is an Android app with the same daemon
inside: Home Assistant adds it like an Echo, with the same wake words, screens, timers, alarms, intercom and announcements. No unlock and no root, on tablets and the Meta Portal. Tested on a Fire HD 8 (10th gen), a Galaxy Tab S6 Lite and a Meta Portal (2nd gen); other Android 8.0+ tablets may work. TECHO5 Panel, docs/panel.md
  • 🗣️ Also in v1.3.0. Nearest device answers is now on by default, also on devices where it had
been turned off. The Show 8 (both generations) draws some controls larger to fit its screen. The Show 8 2nd gen's kernel now picks its screen from the name the bootloader passes, so a unit installed with --force-panel gets its own screen's driver with the kernel update (ten screens known; only the BOE ILI9881C one tried on a unit; three tried since v1.6.17).
  • 📷 The Echo Show 8 2nd gen's camera works (v1.2.24). Live on its own screen, a Home Assistant
camera, and everything else the other Shows do with theirs (presence, person detection, gestures, your recorder). It's off while the device is muted or the shutter is closed. It comes with a new kernel, which the device installs on its own as a trial and puts back if it doesn't come up right. Also: a Bluetooth Secure Connections switch for phones that pair and then drop a second later (#183); on the Dot, AirPlay recovers when it stops showing up after the first use (techo5-dot#14); and the camera's /camera.jpg and /camera.mjpeg pages now ask for the camera password and light the green dot while they're watched. If something reads those pages with no password today (a Home Assistant Generic Camera, a recorder), set a camera password and give it to that with Digest authentication, or it stops getting pictures. docs/setup.md
  • 📅 A calendar for the wall (v1.2.23). The calendar's new look: a day and a week on their hours,
a cleaner month, Coming up with each day's weather, event icons, countdowns, a filter for which calendars a screen shows, and the next event at the foot of the clock, each with its own switch under Settings > Display > Calendar. The screen can stay on when you say "lights off" in its room (#179), light themes work over a photo, and the Show's music buttons are drawn like the rest of its buttons (#173). Music Assistant finds a device it reaches by address again after the device restarts (#182), a radio favorite Home Assistant didn't start says why on the screen (#174), a slideshow folder set again is read again at once (#180), and the log says why the ambient noise sensor has no reading (#178). Thanks to @christianschmidt and @tibole. docs/setup.md
  • 🔗 Settings that follow you, a realtime voice, and a camera that knows a person (v1.2.22).
Pick a setting on the setup page and tick the other devices that should keep it in step: each one agrees first, and a device that was off catches up when it's back. A wake word can be answered by a speech-to-speech model at OpenAI, xAI or Gemini (it sends your voice to them, and they bill for it; off until you choose it, with a daily limit). With presence detection on, a Show or Spot can tell a person from anything else that moves, on the device.
  • 🎥 Your Echo as a camera for your recorder, and cameras by the grid (v1.2.21). A Show or Spot can
serve its own camera to Frigate or any NVR over RTSP and ONVIF, with a login and a green dot on the screen while it's watched; the Show shows up to six cameras at once, and go2rtc's streams join the list. Off until you turn them on.
  • 🗣️ The nearest Echo answers, and more you can run from home (v1.2.21). With several devices in
earshot, only the one that heard you best answers. Thermostats open their controls in Drawn mode (#170); settings save to a file and restore; a signed remote API and live logs; timers pause and take extra time from Home Assistant; and an event on two calendars shows once. Thanks to @remylpat, and to @wonderslug for the Echo 2nd gen's own speaker tuning (#169).
  • 🔊 The Echo 2nd gen (dot-v1.0.19). The 2017 Echo (radar) runs TECHO5 Dot: the same release,
installer and daemon as the Dot, with its own amplifier, the speaker filters from the unit itself and its own Bluetooth kernel. Its USB is only inside the case: install steps.
  • 🌄 Light only alarms, and a night that's easier to live with (v1.2.20). An alarm can be a
wake-up light with no sound (#164), a tap can lift the night light on the Show (#163), and the Spot's night clock comes sooner and goes dimmer (techo5-spot#7). Thanks to @kevin909867 and @paolofaz.
  • ⚡ The Show 8 2nd gen at full speed (v1.2.19). Its kernel now scales the CPUs up to 1.99 GHz
instead of leaving them at the bootloader's 1.1 to 1.2 GHz: about 55% faster on one core and 60% on all eight, ahead of a Raspberry Pi 5 on all cores, with temperature control. The kernel comes over the air from Home Assistant like any update. Numbers: TECHO5 ATHENA
  • 🌅 A wake-up light that stays on, and sounds and wake words of your own (v1.2.19). The light
holds at full between close alarms and through a snooze (#161), and the setup page takes your own sounds and wake word models (#160). Thanks to @7rozen7ear.
  • 🆕 The Echo Show 8 2nd gen (v1.2.16). TECHO5 now runs on the 2021 Show 8 (athena), on its own
64-bit mainline Linux kernel: the first OS other than Fire OS on it. Screen, touch, all four mics, the speaker, Bluetooth, Wi-Fi and the light sensor work. The story and the board: TECHO5 ATHENA. Install: docs/install-athena.md
  • 🌙 The night clock on the Spot (spot-v1.1.14). The Spot can show the Show's dim red night clock
at night, or turn its screen off, instead of only dimming.
  • 🔊 Speaker gain (v1.2.15, Show 5 units with the TAS5805M amp; also the Show 8 2nd gen and the
Dot). Up to +6 dB more, kept across restarts. Thanks to @OneWithNoFace.
  • 📱 Your phone plays to the device (v1.2.11 to v1.2.15). Pair a phone and play to the Show, Spot
or Dot over Bluetooth; pause and play on either side reach the other. Thanks to @tibole.
  • ✋ Cancel request (v1.2.14). A button in Home Assistant ends a request that's running, at any
step. Thanks to @tibole.
A dashboard drawn by the Echo Show 8 itself: tiles for a lamp, a fan, a scene, a porch light, a lock, the heat and the weather The same dashboard streamed to the Echo Show 8 exactly as Home Assistant draws it, with a five-day forecast
Drawn on the device: instant, no server Streamed: exactly as Home Assistant draws it

Home Assistant dashboards on the screen (v0.9.0). The Echo Show and the Echo Spot can show a dashboard as a page you swipe in from the left edge of the clock (on the Spot, from the ring menu), or in place of the clock when nothing else is on the screen. There are two ways, picked per device in Home Assistant:

  • Drawn on the device. The device reads the dashboard's cards and draws them itself, in your
theme's colors: tiles you can tap or slide for brightness, position and temperature, rows with switches, graphs, gauges, pictures and more. Taps are instant and nothing else is needed. With no dashboard picked, it builds a Rooms dashboard from your Home Assistant areas.
  • Streamed. dashcast, a small server that runs next to Home Assistant
(a Docker image for PCs and Raspberry Pis), opens the dashboard in a headless browser and sends the screen only what changes, encrypted with a key of your choosing. It looks exactly as Home Assistant draws it, custom cards included, and it can show built-in pages like Energy and History.

For a Show on a wall, a tap on the clock can open the dashboard, a few tiles can fill the whole screen, and the clock comes back on its own after the time you choose.

Which to use, how to set it up and what each can do: docs/dashboards.md.

Now playing from Music Assistant, with the album's cover behind the song Now playing on the Echo Spot, with the album cover in a circle
Cover art for Music Assistant (v0.8.13). Music from Music Assistant, your own library included, now shows its album cover on the now-playing screen, the way radio stations already did. Music Assistant sends the picture itself, so there's nothing to set up. On the Spot it sits in a circle over the song.
  • 💬 Notifications from Home Assistant (v1.2.7). An automation can put a notification on the
screen: a title and a few lines, or its words over a picture, such as a doorbell's camera. It can chime and be read aloud, and Home Assistant gets an event when it is tapped or its time runs out. A Dot chimes and speaks. Thanks to @wonderslug. docs/actions.md
  • 🎶 What's playing, in Home Assistant (v1.2.7). New sensors say what the device plays: the
source, title, artist, album and whether it is playing or paused, for AirPlay, Spotify, DLNA, Music Assistant, a phone over Bluetooth and the radio. Thanks to @maxvaega. docs/setup.md
  • 🎚️ Spotify's slider follows the device (v1.2.7, not tested on a device yet). The Spotify app's
volume slider and the device's volume are one: the slider sets the device, and the buttons, Home Assistant and night volume move the slider. If you use Spotify Connect, open an issue to say whether it works for you. docs/setup.md
  • 🔤 Fonts, and fonts of your own (v1.2.7). The Show and the Spot can draw their words in one of
nine other fonts instead of Go. A font file of your own fills in what those fonts lack, such as Korean, Chinese or Japanese song titles. docs/setup.md
  • 📍 A fixed network address (v1.2.7, Show and Spot). Set on the screen, the setup page or from
Home Assistant. A new address is tried before it is kept. Thanks to @mawi13. docs/setup.md
  • 🎥 Live camera video (v1.2.7, off by default). With Live camera video on, a camera Home
Assistant can stream shows as live video, with its sound, decoded on the device instead of snapshots. On the Show a camera's own RTSP address can be used for its picture and sound too, for less delay. Thanks to @mawi13. docs/setup.md
  • 🌧️ Rain sounds by voice (v1.2.7). A ready-made automation plays a free online rain stream on
the device that heard "play the sounds of rain". docs/actions.md
  • 🔔 A doorbell chime for Reolink doorbells (v1.2.5). With the doorbell on a Reolink Home Hub or
NVR, a press rings a classic three-tone door chime and puts its camera up on a Show or Spot, with no Home Assistant needed. docs/setup.md
  • 🔊 Fuller sound (v1.0.0). Music no longer sounds flat or dips when the bass hits: the volume
now goes in front of the speaker's own tuning, as on Amazon's software, so the limiter only works near the top of the dial. Every volume step is as loud as it was. On every Echo.
  • 🖼️ A Show on the wall (v1.0.0). A tap on the clock can open the dashboard instead of Assist, a
few dashboard tiles can fill the whole screen, and a dashboard you opened goes back to the clock after the time you choose. All of it can be set from the setup page. docs/dashboards.md
  • 🌍 The clock in your language (v1.0.0). With Screen language set to German, Spanish, French,
Italian, Dutch, Portuguese or Russian, the clock's date, the forecast and the weather are written in it. docs/setup.md
  • 🎶 Now playing follows another speaker, and lyrics (v1.0.0). Now playing can follow another of
Home Assistant's players, a Sonos in the same room say: its song and cover show while the device plays nothing of its own, and the buttons control it. A Lyrics switch (off by default) shows the words in time with the music, from the free LRCLIB database, for Music Assistant, DLNA and followed players. docs/setup.md
  • 👀 Presence detection (v1.0.0). The Show's and the Spot's camera can notice somebody near: a
Motion sensor for Home Assistant, and the screen goes out when the room has been empty a while and comes back as you walk up. On the device only, nothing kept; off by default. docs/setup.md
  • ✋ Cover the camera to stop an alarm (v1.0.0). With Gestures on, a palm over the
camera stops a ringing alarm or timer and sends Home Assistant an event. Off by default. docs/setup.md
  • 🔒 A settings lock (v1.0.0). Set a PIN and the Show and the Spot ask for it before their
settings change; alarms, the volume, the brightness and everything else in daily use keep working for guests and kids. Off by default. docs/setup.md
  • 📡 DLNA, and FLAC (v1.0.0). Every device can be a DLNA speaker that music apps and servers play
to (BubbleUPnP, Jellyfin, Plex, a NAS), off until you turn it on. Streams in FLAC now play on the device too, alongside MP3 and WAV. docs/setup.md
  • 📲 AirPlay and Spotify Connect (v0.9.25). Every device but the Panel app can be a speaker other
apps play to (the Spot since v1.6.8), under the device's own name: AirPlay from an iPhone, iPad or Mac, and Spotify Connect from the Spotify app (Premium). Both are off until you turn them on, on the screen, the setup page or in Home Assistant, and what they play shows as now playing. Since v1.2.7 the Spotify app's slider follows the device's volume, and the device follows the slider. If something does not work, open an issue. docs/setup.md
  • 🛡️ A firewall on Wi-Fi (v0.9.25). The Show and the Spot now take nothing in over Wi-Fi but what
they serve, as the Dot already did.
  • ⚙️ Settings that are easier to find (v0.9.25). The long settings cards are grouped under
headings, with what is changed most at the top, and the setup page opens Sound & Voice with the volume, wake word, quiet hours and do not disturb. The Spot's screen and the setup page also offer the Audio output choice, for a device with a headphone jack.
  • 🚪 Talk through cameras (v0.9.24): answer the door from another room, straight to a camera's
own speaker. docs/setup.md
  • 🗣️ It stops listening when you stop talking (v0.8.14). After the wake word, the device hears
you finish and ends the turn itself, instead of waiting for Home Assistant. With a TV or other voices in the room, that used to mean 10 to 15 seconds of listening, or a turn that timed out and did nothing. A switch per device, End of speech on the device, puts it back the old way.
  • 🌙 A night light (v0.8.12, v0.8.13). Night hours can dim the screen to a faint glow instead of
turning it off, and the first touch only brings it up. Music playing at night no longer keeps it bright, and Night light brightness (1 to 10) in Home Assistant sets the glow. Screenshot
  • 🎵 Music that behaves (v0.8.9 to v0.8.13). A mini player strip over the clock with its own
controls, Done and a favorite star on the now-playing page, pause and play that keep your place with Music Assistant, and answers and announcements that play over the music, ducked, instead of stopping it. Two ways a device could end up saying "Playing" in silence are fixed. Screenshot
  • ⏰ Alarms and reminders (v0.8.1 onward). An alarm or reminder can ring once on a particular
day, each alarm can choose its own wake light, and reminders can be set by voice ("remind me every Wednesday at 8 to take the trash out") with the automation in docs/actions.md. Screenshot
  • 🔁 A Restart button in Home Assistant for every device (v0.8.13): restarts the TECHO5 software
the way an update does, for when something is stuck and you'd rather not unplug it.
  • 🌧️ Sleep sounds (v0.8.14). "Play the sounds of rain" no longer brings up the forecast, and a
sound file served by Home Assistant shows its own name on the now-playing page. The sound comes from Home Assistant: a ready-made automation is in docs/actions.md.
  • 🎙️ More by voice, with ready-made Home Assistant automations in
docs/actions.md: set, cancel and list alarms ("cancel the 6 AM alarm", "what alarms do I have"), and change the volume on the speaker you're talking to rather than every speaker in the room.
  • 📺 The Echo Show 8 (v0.8.0) runs the same software, laid out for its bigger screen.
Screenshots

Built on EchoLocal

TECHO5 started from EchoLocal by Yuri Gelfand (MIT), which already turns the Echo Dot 2 (biscuit, the same MT8163 family) into an ESPHome-native Home Assistant satellite, with a single static Go daemon that drives the hardware directly. TECHO5's echod is that daemon, vendored and ported to the Show 5's cronos, and much of it is still EchoLocal's code: the wake word engine, the ALSA client and the service framework almost unchanged, and the voice satellite, media player and component registry grown from EchoLocal's own. What TECHO5 added is the Show's hardware, the screen, the camera, Bluetooth, the update and slot system, phone calls, and a minimal Alpine root filesystem in place of Android. See NOTICE for the full attribution and EchoLocal's license.

Why TECHO5

| | | |---|---| | 🐧 Real Linux, no Android | The Show boots straight into a minimal Alpine Linux root filesystem. No Android framework, no Google services, no app store: one daemon drives the microphones, speaker, screen, camera and radios directly. | | 🚫 No Alexa, no Amazon account, no Amazon cloud | Your voice goes only to your Home Assistant, over its encrypted ESPHome API. The Show reaches the internet just for what you use: update checks against this repo, network time, radio streams with their song and cover lookups, the rain radar map, and in the U.S. the National Weather Service's weather alerts. Voice and control keep working with the internet down, as long as your Home Assistant pipeline is local. | | 🎙️ Two wake words, two assistants | microWakeWord runs on the device and listens for two wake words at once, each with its own Home Assistant assistant: "Okay Nabu" for a local one and "Hey Jarvis" for a cloud one, say. Each has its own sensitivity, sounds, ring and follow-up. Twelve words come with it ("Alexa", "Okay Nabu", "Hey Jarvis", "Hey Mycroft", "Computer" and more), and you can add your own. Say "stop", with no wake word, to stop an alarm, an answer or the music. Echo cancellation keeps it listening over music. docs/setup.md | | 🧠 Voice without Home Assistant, if you want | Instead of Assist, the device can use your own speech servers (Wyoming: faster-whisper and Piper) and a chat model (llama.cpp, Ollama or anything OpenAI-style). It sets timers and alarms, plays the radio, the news update you ask for (Fox, NPR, ABC or your own) and Music Assistant, changes the volume and calls other devices, and can look things up with SearXNG. Or answer a wake word with a realtime voice at OpenAI, xAI or Gemini, with your own key. docs/setup.md | | 🔐 Secure by default | SSH is keys-only and off until you turn it on; keys arrive only through Home Assistant. The camera and screen web pages start closed, and a firewall lets in nothing on Wi-Fi but what the device serves. No password logins, not even in rescue. | | 🔄 Updates that can't brick it | Signed releases install over the air from Home Assistant's update card into the spare of two root filesystem slots, boot on trial, and fall back on their own if the new one doesn't settle. Follow the stable or the dev channel, and let it install on its own between 2 and 5 AM if you like. | | 📺 A screen that's actually useful | Clock and weather, the conversation as it happens, a glance strip of chips from Home Assistant along the foot of the clock, a calendar, now playing with song, cover art and lyrics, your Home Assistant dashboards, forecasts, a live rain radar, the National Weather Service's alerts (in the U.S.), live cameras from Home Assistant or go2rtc, up to six at once, notifications, timers and alarms, Wi-Fi setup, Home Assistant's to-do and shopping lists, 13 themes, ten fonts, ten languages (five with the whole screen translated, Spanish part of it, and Dutch, Portuguese and Russian the clock and weather), and 15 clock styles you swipe between. Auto-brightness follows the room's light. | | 📅 A calendar on the screen | Home Assistant's calendars, or any calendar's own iCal link: a day and a week on their hours, the month, Coming up with the weather, event icons and countdowns, pop-ups for the calendars you choose, and the next event under the clock. docs/setup.md | | 🖼️ Your photos, three ways | From anything Home Assistant's media library can browse (its media folder, network shares, Immich), from Immich directly (an album, favorites, dates, a person), or kept on the device from the setup page. Behind the clock or as a screensaver, whole photos with blurred sides, two tall ones side by side, with date and place. docs/setup.md | | 🏠 The whole house, even with Home Assistant down | Announce to every device, in typed words or your own voice. Call one device from another, with an optional Drop In. Only the nearest device answers a wake word, on by default once the devices share a house word. Settings stay in step between the devices you pick. All of it goes device to device, signed with a house word you set. docs/phone.md, docs/actions.md | | 🎛️ A stream deck | TECHO5 Deck turns a Show into pages of buttons for OBS (scenes, stream, record, mute, sources) and for your computer (shortcuts, typing, apps, websites, scripts), through a small agent for Windows, macOS and Linux. It talks to them directly, so it works without Home Assistant. docs/deck.md | | 🌧️ Sleep sounds made on the device | Rain, ocean, wind, a brook, a fire, crickets, a fan, a cabin, and white, pink and brown noise, two at once, made as they play so they never loop. The sleep timer stops them, or any music. Bass and treble are yours to set. docs/setup.md | | 🎬 Videos on the screen | An address from Home Assistant's play_video action, or a video from a DLNA app or media server (BubbleUPnP, Jellyfin, Plex, Windows' Cast to device), plays full screen with its sound, on the Show and the Spot. H.264 at 720p plays best. Off until you turn it on, and a DLNA video from a new address asks on the screen first. docs/video.md | | 📻 Weather and radio with no setup | A new Show uses the forecast every Home Assistant has, and lists the radio stations near home from Home Assistant's Radio Browser. Pick another weather entity (your own station, say) on the screen, and keep your own favorite stations too. | | ⏰ Alarms that ring on their own | Set on the screen, by Home Assistant, or followed from its helpers; they ring from the Show's own clock even when Home Assistant is down. Snooze included, and the screen can wake you with a sunrise before the sound. | | 🎧 Bluetooth, rebuilt | Earbuds and speakers over A2DP, plus a Home Assistant Bluetooth proxy, on a kernel rebuilt with Bluetooth from the LineageOS source. | | 📞 A speakerphone again | Calls through your own SIP provider: "call Alex" by voice, calls that ring on the screen, calls between your own devices, and a help call that alerts your phones and dials people in turn. Encrypted end to end to the provider, and off until you sign it in. docs/phone.md | | 👶 A baby monitor | A private link plays the room's sound live in a phone's browser, on the Show, the Spot and the Dot. Off until you turn it on; the screen (or the Dot's light ring) shows when someone is listening, and the mute switch stops it. docs/setup.md | | 🔊 Sounds and levels of your own | Replace the volume, button, Bluetooth, listening-ended, Drop In and announcement sounds with your own, one at a time or as a sound pack. Replies and announcements, and calls, can each sit above or below the music volume, and spoken replies can play on any Home Assistant media player. docs/setup.md | | 📷 A camera you control | The front camera becomes a Home Assistant camera entity, off unless something is watching, and physically off while the mute button is engaged. | | 🛟 Always recoverable | A rescue environment with a USB serial console, and TWRP left in place: LineageOS is one flash away. |

Screenshots

Straight from the device's own screen. All of them, including the Echo Show 8 and the Echo Spot, are in docs/screenshots.

| | | |---|---| | !Clock with weather over a photo | !An alarm ringing, with Stop and Snooze | | Clock, weather and your own photos behind it | Alarm ringing, big enough to hit half awake | | !Now playing from Music Assistant, with the album's cover | !The mini player strip over the clock | | Now playing, with the album's cover | The mini player, over the clock | | !The clock with a glance strip of chips from Home Assistant along the foot | | | The glance strip: chips from Home Assistant, only while they have news | | | !Settings: Display | !Settings: Sound & Voice | | Settings by category, grouped under headings: brightness, night, look, home screen, weather | Sound & Voice: the speaker, then voice, quiet, music and cameras | | !Alarm editor | !Settings: Privacy & Security | | Alarms set on the device, no app needed | Privacy: every open door has a switch | | !Theme list | !Settings: Connections | | Themes: presets or your own colors | Connections: Wi-Fi, Bluetooth and the Home Assistant proxy | | !Weather with a five day forecast | !The cameras drawer | | Weather now and for the week, with the rain radar a tap away | Cameras and Radio, a swipe in from the right |

The sunrise</p>
<p>... <em>(README truncated for length)</em></p>

                            </article>

                            <!-- Article Completion Section -->
                            <div class=

You finished the article!

Want to go deeper or explore more stories?

Chat with me