Deckhouse Prom++

Deckhouse Prom++ is an open-source, high-performance fork of Prometheus, designed to significantly reduce memory consumption while maintaining full compatibility with the original project.

Overview

Deckhouse Prom++ builds upon Prometheus, one of the most widely used monitoring and time-series databases. It retains full compatibility with Prometheus, including:

• Configuration files
• API endpoints
• Storage block format
• All functional capabilities

Key Benefits

• Drastically reduced memory usage

• Effortless migration

Getting started

Deckhouse Prom++ is fully compatible with Prometheus. Once installed, simply replace Prometheus with Deckhouse Prom++ — no configuration changes are needed.

Example configurations can be found here.

Installing Deckhouse Prom++

Converting WAL before installation

Deckhouse Prom++ uses a different WAL (Write-Ahead Log) format but remains fully compatible with historical blocks. Since WAL contains the last 1.5 blocks of data (typically around 3 hours), if you plan to use Deckhouse Prom++ as a replacement for Prometheus, WAL conversion is required to prevent data loss.

Refer to the Migration Guide for detailed conversion steps.

Precompiled binaries

1. Download the latest binary from the Releases page.
2. Run it as a direct replacement for Prometheus:

./prompp --config.file=prometheus.yml --storage.tsdb.path=data/

Docker

Deckhouse Prom++ is available as a Docker image on Docker Hub.

To quickly run a container:

docker run --name prompp -d -p 127.0.0.1:9090:9090 prompp/prompp

Once running, Deckhouse Prom++ will be accessible at http://localhost:9090/.

You can also add own config for Prom++ by passing config.file parameter

docker run --name prompp -v /path/on/host/prometheus.yml:/etc/prometheus.yml -d -p 127.0.0.1:9090:9090 prompp/prompp --config.file=/etc/prometheus.yml

Prometheus Operator

1. Create a file prompp.yaml with the following configuration (other settings may be required depending on your setup):

apiVersion: monitoring.coreos.com/v1
   kind: Prometheus
   metadata:
     name: example-prometheus
     namespace: monitoring
   spec:
     image: prompp/prompp:<tag>  # Replace Prometheus with Deckhouse Prom++
     securityContext:
       fsGroup: 64535
       runAsGroup: 64535
       runAsNonRoot: true
       runAsUser: 64535
     # Additional parameters may be required based on your installation

1. Apply the updated resource:

kubectl apply -f prompp.yaml

Migrating from Prometheus

Manual WAL conversion

If migrating manually, use the prompptool utility included in the release:

Convert Prometheus WAL to Deckhouse Prom++ format

prompptool walvanilla --working-dir <path to prometheus data dir>

Convert Deckhouse Prom++ WAL back to Prometheus format

prompptool walpp --working-dir <path to prometheus data dir>

Automatic WAL conversion with Prometheus Operator

Converting Prometheus WAL to Deckhouse Prom++ format

1. Create a file prompp-migration.yaml with the following configuration (additional parameters may be required based on your installation):

apiVersion: monitoring.coreos.com/v1
   kind: Prometheus
   metadata:
     name: example-prometheus
     namespace: monitoring
   spec:
     ...
     image: prompp/prompp:<tag>  # Replace Prometheus with Deckhouse Prom++
     securityContext:
       fsGroup: 64535
       runAsGroup: 64535
       runAsNonRoot: true
       runAsUser: 64535
     initContainers:
       - name: prompptool
         image: prompp/prompp:<tag>
         command:
           - /bin/prompptool
           - "--working-dir=/prometheus"
           - "walvanilla"
         volumeMounts:
           - name: prometheus-main-db
             mountPath: /prometheus
             subPath: prometheus-db
         resources:
           requests:
             cpu: "100m"
             memory: "128Mi"
     # Additional parameters may be required based on your installation

1. Apply the updated resource:

kubectl apply -f prompp-migration.yaml

Convert Deckhouse Prom++ WAL back to Prometheus format

1. Modify the initContainer in your prompp-migration.yaml file:

command:
     - /bin/prompptool
     - "--working-dir=/prometheus"
     - "--verbose"
     - "walpp"

1. Apply the changes again:

kubectl apply -f prompp-migration.yaml

Contributing

License

Online community

In addition to common GitHub features, here are some other online resources related to Deckhouse Prom++:

• Telegram chat to discuss (there's a dedicated Telegram chat in Russian as well);
• Deckhouse blog to read the latest articles about all Deckhouse products.